Flywheel Electronic 1900g
1 in stock (can be backordered)
£122.46 ex. VAT - £146.95 inc. VAT
1 in stock (can be backordered)
TOURING POLRAD -BGM Pro TOURING 2.0 electronics 1900g, large fan blades- for Vespa PX200, Cosa200
The BGM PRO pole wheel is a perfect replica of the original PX200 pole wheel. This has large curved blades for high fan performance, ideal for large cast iron cylinders such as the Polini 210. The BGM PRO Touring Polrad is with 1.9 kilograms whopping 1000 grams lighter than its original Piaggio counterpart. This makes it very nice and agile to ride when accelerating, but the engine retains its superior elasticity. It can be used as a 1:1 replacement for the original Piaggio PX200 pole wheel. Of course it can also be used on the engines with smaller displacements (80-190ccm).
FEATURES
- very high fan power, ideal for thermally highly loaded engines (grey cast iron cylinders / hitch operation / continuous load highway)
- 1900 grams = up to 35% lighter than an original pole wheel (Piaggio without Elestart 2800-3200grams)
- High ignition timing accuracy
- Very good concentricity
- Balanced ex works
- Good magnetization
- High quality riveted like original from factory
- Can be used on engines with 80-200cc (and more)
WEIGHT
At 1900 grams, the BGM8225RT (T for Touring) is 1000 grams lighter than the original pole wheel on PX models. It offers the ideal combination of sufficient flywheel mass for a powerful starting torque and a weight reduction for a lively revving of the engine including better acceleration. Compared to the very heavy pole wheels of the older PX models (without Elestart) it offers a 35% lower flywheel mass.
POWER & COOLING
The cooling vanes are curved and have the largest surface area of all the pole wheels for the PX engines. Piaggio first introduced this wing profile on the legendary SS180 engines. This means that high fan performance is always guaranteed, even at low engine speeds. The high cooling capacity is ideal for thermally rather critical engines, such as a Polini 207 grey cast iron with SI24 carburetor that is to be moved at continuous full throttle over the highway or has to cope with a lot of load in sidecar operation.


In-House Rolling Road
Wide Range of Products
Restoration Specialists
Custom One-Off Parts
Need help?
Get in touch - we're always happy to assist.




